ROBOTICSCABLE ASSEMBLY
Kembali ke Semua Perkhidmatan

Pemasangan kabel robot kalis air

Pemasangan kabel robot IP67, IP68 dan IP69K untuk washdown, kabus coolant, kelembapan luar dan servis berulang.

Commercial Cleaning RobotsAGV & AMROutdoor RobotsIndustrial Robot Arms
26-scrubber washdown scenario used to define sealing and hinge-motion failure risks5-8 business day sealed samples after engineering reviewTest report, material stack, and lot traceability available for incoming QA

Gambaran Keseluruhan

Kabel robot kalis air biasanya gagal bukan pada muka penyambung, tetapi pada pengedap belakang, toleransi OD kabel, geometri overmold, kimia jaket dan pelepasan tegangan selepas pergerakan. Dalam semakan 26 robot pembersih, tiga unit mengalami gangguan intermittent dalam enam minggu pertama selepas washdown dan gerakan engsel. Semakan kilang bermula sebelum sebut harga: lukisan, BOM, penyambung pasangan, panjang, kaedah cucian, detergent atau coolant, foto routing dan pecahan kuantiti. Kami memilih IP67, IP68 atau IP69K serta membandingkan overmold, heat shrink berpelekat, backshell bergasket dan penyambung boleh ganti di lapangan. Kerja disemak menurut IPC-A-620, wayar menurut UL-758 dan traceability boleh mengikut IATF 16949. Sampel 5-8 hari bekerja; pengeluaran 3-5 minggu.

Waterproof robot cable assembly validation and outgoing quality testing
Factory testing station used for sealed cable assembly continuity, insulation, and outgoing quality checks.

Piawaian & Pautan Rujukan

Titik rujukan pihak pembeli yang biasa digunakan semasa menyemak mutu kerja, keselamatan pendawaian panel dan jangkaan sistem kualiti:

IEC 60529 IP code referenceIPC-A-620 workmanship referenceUL safety organization referenceIATF 16949 automotive quality reference

Ciri-ciri Utama

IP67, IP68, and IP69K sealing strategy reviewed by real exposure, not catalog claims
Overmold, adhesive heat-shrink, gasketed backshell, and field-replaceable connector trade-off review
PUR, TPE, PVC, and silicone jacket selection matched to washdown chemistry, abrasion, and flex duty
Continuity, pin-map, insulation-resistance, hi-pot, seal review, and strain-relief checks available
Prototype samples typically 5-8 business days after drawing, BOM, and mating hardware review
Production lead time commonly 3-5 weeks after sample approval and material release
No forced MOQ for prototype validation; production quoted by sample, pilot, and annual split
DFM review flags rear sealing, cable OD tolerance, overmold clearance, and service access risk before PO

Spesifikasi Teknikal

sealing TargetsIP67 / IP68 / IP69K strategy by exposure and mating condition
cable MaterialsPUR / TPE / PVC / silicone options reviewed by fluid and flex duty
test ScopeContinuity, pin-map, insulation resistance, hi-pot, seal review, pull relief check
sample Lead Time5-8 business days typical after drawing and BOM review
production Lead Time3-5 weeks typical after sample approval and material release
moqNo forced MOQ for prototype validation; production quoted by quantity split
standardsIPC-A-620 workmanship, UL-758 wire style review, IATF 16949-style traceability when required
documentationDFM notes, material stack, test report, lot traceability, and outgoing QC record

Need waterproof robot cables quoted from real exposure data?

Send the drawing, BOM, mating connector, washdown or fluid exposure, route photos, IP target, and quantity split. We will return DFM notes, sealing-stack recommendation, sample plan, test scope, and quote.

Drawing, BOM, mating connector part number, and cable length
IP67 / IP68 / IP69K target plus washdown method, fluid, dust, or outdoor exposure
Route photos, bend radius, moving versus static branches, and service-disconnect points
Sample, pilot, and annual quantities with target lead time and required report format
Minta Sebut HargaLihat Keupayaan Kami

Apa yang Anda Dapat Kembali

DFM review covering rear sealing, jacket chemistry, overmold geometry, and route-fit risk
Quoted sample and production plan with MOQ, material lead time, and validation scope
Test report plan covering continuity, pin map, IR, hi-pot, seal review, and outgoing QC record

Perkhidmatan Berkaitan

→ Penyelesaian Penyambung Tersuai→ Pemasangan Kabel M12→ Pemasangan Kabel Acuan Suntikan→ Kabel Pemasangan Tersuai→ Pengujian Abah Wayar

Soalan Pembeli Sebelum RFQ

Is IP67 enough for a waterproof robot cable assembly?

Sometimes. IP67 can fit splash or brief immersion, but aggressive washdown, sanitizer, coolant mist, or pressure cleaning may require an IP68 or IP69K strategy plus rear-seal and overmold validation.

What information makes the quote accurate?

Send the drawing, BOM, mating connector, route photos, cable length, fluid exposure, target IP level, quantity split, and required tests. Without those details, suppliers guess at sealing and material choices.

Can you support samples before production MOQ?

Yes. Prototype validation has no forced MOQ. After samples are approved, production is quoted by pilot and annual demand with material lead time and test-report requirements shown clearly.

Terokai Perkhidmatan Lain

Harnes Dalaman Lengan Robot

Pendawaian dalaman pelbagai paksi untuk lengan robot 4-7 paksi dengan rintangan kilasan tinggi.

Pemasangan Kabel Rantai Seret

Kabel fleksibel tinggi direka untuk gerakan berterusan dalam pembawa kabel dan rantai tenaga.

Kabel Sensor & Isyarat

Kabel isyarat ketepatan untuk pengekod, sistem penglihatan, dan sensor industri.

Lihat Semua Perkhidmatan